Chassis Intrusion Pin Header (Ci); Status Leds (Stb & Boot); Table 41: Pin Assignment Ci; Figure 35: Chassis Intrusion Pin Header Ci - Kontron MITX-CFL0 Series User Manual

7.19. Chassis Intrusion Pin Header (CI)

The pin header CI provides a chassis detection feature that detects whether the chassis cover has been removed. This
function requires a chassis with chassis intrusion detection design.

Figure 35: Chassis Intrusion Pin Header CI

Table 41: Pin Assignment CI

Pin Signal
1 Signal
2 GND
7.20. Status LEDs (STB & BOOT)
If the standby status LED STB is on, that means the system is in standby mode; if the boot status LED BOOT is on, that
means the system is powered on.

Figure 36: Status LEDs STB, BOOT

www.kontron.com
Description
Chassis intrusion signal
Ground
1
2
MITX-CFL0 Series - User Guide, Rev. 1.1
Note
// 65