6.4. USB Connectors (I/O Area)
The external I/O connector panel supports two USB 2.0 connectors and two USB 3.0 connectors.
USB 3.0 ports are backward compatible with USB 2.0.
Figure 8: USB 2.0 Connectors USB_LANB USB 2.0 Port 2 / 3
Table 14: Pin Assignment USB 2.0 Connectors USB_LANB USB 2.0 Port 2 / 3
Pin
Signal
1
+USBVCC
2
USB_D-
3
USB_D+
4
GND
Figure 9: USB 3.0 Connector USB30_LANA USB 3.0 Port 0 / 1
Table 15: Pin Assignment USB 3.0 Connector USB30_LANA USB 3.0 Port 0 / 1
Pin
Signal
1
+USBVCC
2
USB_D-
3
USB_D+
4
GND
5
USB3_SSRX-
6
USB3_SSRX+
7
GND
8
USB3_SSTX-
9
USB3_SSTX+
For HiSpeed rates it is required to use a USB cable, which is specified in USB 2.0 standard:
www.kontron.com
Description
+5 V power supply for USB device
USB 2.0 differential pair (-)
USB 2.0 differential pair (+)
Ground
Description
+5 V power supply for USB device
USB 2.0 differential pair (-)
USB 2.0 differential pair (+)
Ground
USB 3.0 receiver differential pair (-)
USB 3.0 receiver differential pair (+)
Ground
USB 3.0 transmitter differential pair (-)
USB 3.0 transmitter differential pair (+)
MITX-CFL0 Series - User Guide, Rev. 1.1
Note
Note
// 31