Table of Contents
Advertisement
GE H
EALTHCARE
D
5344303-100, R
IRECTION
8-2-5
LCD Arm Cover (FRU P/N: 5310093)
This is a description on how to remove and replace the LCD Arm cover set.
8-2-5-1
Tools
•
Common phillips screwdrivers
8-2-5-2
Needed Manpower
•
1 person, 15 minutes
8-2-5-3
Preparations
•
Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-2-5-4
Removal procedure
1) Remove LCD Power Cable cover & LCD Signal Cable Refer Refer
2) Remove LCD-Arm-Cover Assembly as shown below
8-2-5-5
Mounting procedure
1.) Install the new parts in the reverse order of removal.
8-2-5-6
Functional Checkout Procedure
Functional Test
Do Visual Inspection and ensure
no scratches observed and
fitment is done properly
8-8
PROPRIETARY TO GE
3
EVISION
a
b
Figure 8-7 LCD Arm cover & monitor neck cover
Service Manual Direction 5344303-100, Section 8-2-4. Equipment passes all required
Section 8-2 - Disassembly/Re-assembly of VIVID P3
VIVID P3 S
section Section 8-3 on page 21
Figure 8-7 on page 8-8
Remove two screws of
Arm Cover
Debrief Script
tests and is ready for use.
M
ERVICE
ANUAL
Advertisement
Table of Contents
