Installing and removing
4.3 Installing the 3RW5 communication module on a level surface
Procedure
Illustration similar
1. Insert the push-in lugs into each side of the enclosure until you hear them engage.
2. Position the 3RW5 communication module on the level surface over the drill-holes and
insert the head screws.
3. Attach the 3RW5 communication module on the bottom and top side of the level surface
using the head screws.
Result
You have mounted the 3RW5 communication module on a level surface. You can connect
the COM connecting cable to the 3RW50 soft starter (Page 49) and on the
3RW5 communication module (Page 51) and connect the 3RW50 soft starter to the fieldbus
via the 3RW5 communication module (Page 55).
46
SIRIUS 3RW5 EtherNet/IP communication module
Equipment Manual, 03/2020, A5E45131885002A/RS-AB/002