Removing The Com Connecting Cable On The 3Rw5 Communication Module - Siemens SIRIUS 3RW5 Equipment Manual

5.1.3

Removing the COM connecting cable on the 3RW5 communication module

Requirements
● 3RW5 communication module mounted on a level surface (Page 45)
● Removed bus connector (fieldbus) (Page 57)
● Cover cap
NOTICE
Damage to property due to electrical voltage
Switch off the power to the 3RW5 soft starter before starting work
(main and control supply voltage).
Procedure
Illustration similar
1. Loosen die securing mechanism on the bus connector of the COM connecting cable.
2. Pull the bus connector of the COM connecting cable out of the plug-in connection of
the 3RW5 communication module.
Result
You have disconnected the 3RW5 communication module from the 3RW50 soft starter.
Place the cover cap onto the front plug-in connection of the 3RW5 communication module.
SIRIUS 3RW5 EtherNet/IP communication module
Equipment Manual, 03/2020, A5E45131885002A/RS-AB/002
Connection
5.1 COM connecting cable
53