Mounting And Adjustments; Installing Tines; Replacing Connecting Rods - SaMASZ TANGO 730 Operator's Manual

Detach the machine from the tractor,
❑
Secure hitch pin with a padlock (Fig. 36).
❑

6. MOUNTING AND ADJUSTMENTS

6.1. Installing tines

Tines should be installed according to scheme provided in Fig. 37.
CAUTION!
Use only the tines recommended by the manufacturer.
CAUTION!
Before you change the tine check rotor turns (Fig. 37).

6.2. Replacing connecting rods

In case of connecting rod damage, a simple replacement is possible by removing the damaged
part. Replace as follows:
Secure raking arm with support (Fig. 16),
❑
Remove expansion pins (K) from arm mount,
❑
32
TANGO 730
Fig. 36. Protection against unauthorized use
Fig. 37. Installing raking tines
TWO-ROTOR ROTARY RAKE OPERATOR'S MANUAL