SaMASZ Z-300 Slim Operator's Manual
  1. Manuals
  2. Brands
  3. SaMASZ Manuals
  4. Farm Equipment
  5. Z-300 Slim
  6. Operator's manual

SaMASZ Z-300 Slim Operator's Manual

Rotary rake
Hide thumbs Also See for Z-300 Slim:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
ROTARY RAKE
Z-300 – 9' 10"
Z-301 – 9' 10"
Z-350 – 11' 6"
Z-351 – 11' 6"
Serial No:
Translation of original instructions
Z-300 Slim – 9' 10"
Z-301 Slim – 9' 10"
Z-350 Slim – 11' 6"
Z-351 Slim – 11' 6"
Z-410 – 13' 5"
Z-440 – 14' 9"
Z-470 – 15' 5"
SaMASZ Sp. z o.o.
Poland, 16-060 Zabłudów, ul. Trawiasta 1
Established – 1984
NIP PL-966-159-29-76
tel. (+48) (85) 664 70 31
fax (+48) (85) 664 70 41
e-mail: samasz@samasz.pl
EDITION NO 11
www.samasz.pl
IN300USA011
2017.09.25

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z-300 Slim and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SaMASZ Z-300 Slim

Summary of Contents for SaMASZ Z-300 Slim

  • Page 1 (+48) (85) 664 70 41 e-mail: samasz@samasz.pl www.samasz.pl OPERATOR’S MANUAL ROTARY RAKE Z-300 – 9' 10" Z-300 Slim – 9' 10" Z-301 – 9' 10" Z-301 Slim – 9' 10" Z-350 – 11' 6" Z-350 Slim – 11' 6" Z-351 – 11' 6"...
  • Page 2 Well-proven design with thousands of machines in regular use in many countries and quality materials ensure high durability and reliability of SaMASZ rakes. We congratulate you on the purchase of your new SaMASZ rake and wish you much pleasure and the very best work results through the years to come.

  • Page 3: Table Of Contents

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 Contents page 1. IDENTIFYING THE MACHINE ....................2 2. INTRODUCTION ......................... 2 3. PROPER AND INTENDED USE ....................3 3.1. Technical data ........................3 3.2.

  • Page 4: Identifying The Machine

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 1. IDENTIFYING THE MACHINE Data plate is mounted to the rake’s main frame in the place shown below (Fig. 1). Fig. 1. Data plate location Fig.

  • Page 5: Proper And Intended Use

    Rotary rake Z-300, Z-300 Slim, Z-301, Z-301 Slim, Z-350, Z-350 Slim, Z-351 and Z-351 Slim works properly with tractors (power from 20 HP).
  • Page 6 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 Fig. 3. Rotary rake Z-350 1 – Main frame 6 – Support chain 2 – Rotor 7 – 3-point linkage frame 3 –...

  • Page 7: Standard Equipment And Spare Parts

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 3.3. Standard equipment and spare parts The rakes are sold with the following standard equipment: warranty card, operator’s manual with spare parts list, PTO shaft, spray paint (150 ml).

  • Page 8: Safety Precautions

    Z-410; Z-440; Z-470 NOTE: Optional extra equipment should be ordered separately. PTO shafts of other brands with equivalent parameters could be used afetr SaMASZ permission. 4. SAFETY PRECAUTIONS The following precautions are for your safety. They must be read carefully and followed by every person who operates or maintains the machine.
  • Page 9 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 DO NOT operate the rake unless all safety guards are in place and operational. No person (except operator) should stand within danger area which is a minimum of 170' from...

  • Page 10: Conditions Of Mounting Rake On Tractor

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 4.2. Conditions of mounting rake on tractor Prior to the mounting operation, be sure that the tractor and rake hitches are compatible and that the tractor's hitch load is adequate for the machine which is to be mounted or attached.

  • Page 11: Working Parts

    4.6. Residual risk Despite the fact that SaMASZ Białystok, the manufacturer of the rake, has taken great care in the design and manufacturing of the rake, certain risks during rake operation and maintenance are unavoidable.
  • Page 12 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 4.6.1. Danger of machine entanglement This risk occurs when (1) changing position of a rake, (2) operating near rotating parts, and (3) working without safety guards.

  • Page 13: Safety Decals And Their Meaning

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 4.7. Safety decals and their meaning Safety labels are critical to safe use of this rake. They must be read, understood and followed. Also,...
  • Page 14 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 N-81 N-124 (For: Z-351, Z-410, Z-440, Z-470) PTO rotation direction Z-162 N-167 N-168 (For: Z-410, Z-440, Z-470) Do not remain on the...

  • Page 15: Operation

    - Replace protective cover if damaged. 5.1. Attaching the rake to the tractor a) For rakes Z-300, Z-300 Slim, Z-350 and Z-350 Slim The rake should be mounted on tractor with use of 3-point linkage as provided on Fig. 9.

  • Page 16: Preparing The Rake For Transport

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 Fig. 9. Connecting the rake Z-350 to the tractor b) For rakes Z-301, Z-351, Z-410, Z-440 and Z-470 Rake should be mounted on tractor with use of 3-point linkage frame. Tractor's lower links C should be shortened maximally with use of turnbuckles (if links are lowered too much, it will cause the rake to be lifted not high enough during its transport).
  • Page 17 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 Fig. 11. Rotary rake in transport position CAUTION: When lifting the machine for transport pay attention so that the tractor's glass pane is closed.

  • Page 18: Transporting Rakes Aggregated With Tractor By Means Of Tiller (Option) (For: Z-410, Z-440 And Z-470)

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 NOTICE: Once the machine is set to transport position, check whether mechanical locking pawls are properly locked on pins. NOTICE: Prior to operating with the machine unlock the gear by lowering the guard.

  • Page 19: Preparing The Rake For Transport On Public Roads

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 5.4. Preparing the rake for transport on public roads WARNING: Legal requirements for transport on public roads may differ from state to state.
  • Page 20 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 - Minimal shaft length Fig. 18. Properly measured shaft length – 5.9" CAUTION: When using links to lift the machine suspended on 3-point linkage, PTO speed should be reduced or absolutely it off at the angle of shaft work more than 25°.

  • Page 21: Moving From Transport To Working Position

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 CAUTION: The PTO shaft should be mounted only during operation time and disconnected from tractor PTO for transport and service. NOTICE: The manufacturer declines all liability for damage caused by an incorrectly fitted or used PTO shaft.
  • Page 22 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 Fig. 20. Recommended rake setting – a) under normal operating conditions, b) when operating on an even ground using lever (D) (Fig. 22) either lower or lift it to set a required raking height; raking tines should be set vertically in relation to the ground, not touching the ground however (Fig.
  • Page 23 Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 CAUTION! The raking arms' height should be controlled on an on-going basis while operating the machine, and if need be, adjusted. Adjustments are performed with tractor's drive off.

  • Page 24: Operation

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 5.8. Operation Rotary rake is designed for raking forage, dry forage and hay after having been treated by rotary tedder. Speed should be adjusted to terrain conditions, swath size and cleanliness of raking .

  • Page 25: Mounting And Adjsutments

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 6. MOUNTING AND ADJSUTMENTS 6.1. Mounting and timing of the tines The tines should be mounted as shown in Fig. 27.

  • Page 26: After-Season Maintenance And Storing

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 WARNING! Be extremely careful when cleaning the machine with a pressure washer. Do not direct the water jet directly onto the bearings.

  • Page 27: Lubrication

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 Tab. 4. Torque values for bolts In the absence of specific torque values, the following chart can be used as a guide to the maximum safe torque for a particular size and grade of fastener.

  • Page 28: Joints

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 7.2. Joints Every 50 hours of rake’s operation, make sure to lubricate bearing beds (Fig. 30a), points D and E of the gear (Fig. 30b) and trolley (Fig. 31) with grease ŁT43 (or other lubricant designed for lubricating rolling and sliding bearings, which are exposed to operating in temperatures between - 30°C and +130°C).

  • Page 29: Malfunctions And Their Repairs

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 8. MALFUNCTIONS AND THEIR REPAIRS Defect Reason Repair Lack or bent raking tines Replace tines Too low rotation speed Increase rpm...

  • Page 30: Warranty Terms

    2. The warranty period is for two years from the date of sale to the purchaser, stated above. 3. Any repair which is subject to warranty should be carried out by an authorised SaMASZ dealer. Upon completion of the repair the dealer must submit a warranty claim within 14 days.

  • Page 31: Warranty Repairs Record

    Rotary rake Z-300; Z-300 Slim; Z-301; Z-301 Slim; Operator’s manual Z-350; Z-350 Slim; Z-351; Z-351 Slim; Z-410; Z-440; Z-470 11.2. Warranty repairs record Repairs description and changed spare parts: Date, stamp and signature of repair shop. Date, stamp and signature of repair shop.

This manual is also suitable for:

Z-301Z-301 slimZ-350 slimZ-351Z-351 slimZ-410 ... Show all

Table of Contents