Installation Of Modules - ELCOM Euro-2000T Alpha Service Manual

4. Installation of modules.

Before installing modules and options.
If you install any module or option in the Euro register already in use, you must have a reset performed by its user
•
before performing the installation. If the register is not reset, sales data stored in the register may be destroyed
due to possible incorrect installation.
Before installing we recommend that you print out Z reports, setting of the register, resp. save all data by
•
EuroSoft down load functions, if it is possible.
Before installing make sure the external adaptor is unplugged and ECR is turned off by switch OST 005.
•
4.1. Removing and installing the top cabinet
1) Remove the eight screws situated on the bottom cover and then remove the printer cover.
2) Remove the top cabinet.
3) Release keyboard connector.
Note 1: Before removing and installing make sure the external adaptor is unplugged and ECR is turned off .
4) Replace the top cabinet in the reverse order of removing.
Note 2: During replacement of the cabinet take care to prevent any cables from being caught between the top and bottom
cabinets. Furthermore, prior to screwing the top cabinet back on make sure you use the original screws. The
interchange of screws may cause a damage of cabinets.
No. Quantity
1 2
2 6
Euro-2000T Alpha/1000T
1
Screw 2,9x9,5
Screw 2,9x16
Service manual
2
1
Part name
© Elcom s.r.o.
Code
SR002
SR010
33