Torsion Shaft - Installation - Rotax 915 i A Series Maintenance Manual

Figure 6.58
Support plate
1
3 M40x1.5 collar nut
Special tool 276006
5
Step Procedure
4 Install the retaining ring A38 on the pro-
peller shaft with special tool part no.
276968.
Figure 6.59
Propeller shaft
1
Retaining ring
3
72–10–00
Page 38
June 01 2019
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Propeller shaft
2
4
Protection mushroom
Support plate
2
Special tool 276968
4
TORSION SHAFT — INSTALLATION
ATTENTION
Difference to Configuration 3
– Torsion shaft with oil groove
– Sealing washer without oil hole
– Hex. screw M12x20 with oil hole
Figure 6.60
Step Procedure
1 Lubricate the torsion shaft with LOCTITE
ANTI SEIZE.
2 Position of the teeth is defined with two
marks, see following figure.
3 Install the torsion shaft into the propeller
gearbox (propeller shaft).
Effectivity: 915 i A Series
Edition 0/Rev. 1