Assembly Of The Damper Clutch Assy - Rotax 915 i A Series Maintenance Manual

Step Procedure
4 Install clutch hub. Check if support ring is
installed.
5
Install steel friction plate 4 mm with
groove facing to the bottom.
Figure 6.67
1 Clutch hub
Steel friction plate 4 mm
3
Step Procedure
6 Insert centering ring part no. 276950.
7
Press damper clutch assy. with insertion
jig part no. 276952.
8 Insert circlip and release damper clutch
assy.
NOTE
Check the alignment of clutch hub once again. It
must be free to move.
Effectivity: 915 i A Series
Edition 0/Rev. 1
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Support ring
2
Figure 6.68
Insertion jig
1
ASSEMBLY OF THE DAMPER CLUTCH
ASSY.
NOTE
Use a hand operated hydraulic press or similar.
NOTE
Before assembly, lubricate all components with
engine oil.
Procedure
Step
1 Check if retaining ring is installed and lay
the clutch drum on the centering plate.
NOTE
Begin with damper clutch assy. (big
chamfer) on propeller side.
2 Insert the clutch hub loosely into the
clutch drum (for aligning the friction
plates).
Support ring
2
72–10–00
Page 41
June 01 2019