Assembly Of The Overload Clutch Assy - Rotax 915 i A Series Maintenance Manual

ASSEMBLY OF THE OVERLOAD
CLUTCH ASSY.
NOTE
Use a hand operated hydraulic press or similar.
NOTE
Lubricate all components with engine oil before
assembly.
Step Procedure
1 Lay overload clutch assy. on the insertion
jig part no. 276974.
Figure 6.64
Insertion jig
1
Procedure
Step
2 Assemble clutch package as shown in fol-
lowing figure.
NOTE
Install disc springs contrary to each
other.
72–10–00
Page 40
June 01 2019
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Overload clutch assy.
2
Figure 6.65
Disc springs
1
(contrary)
Sintered friction
3
plates (5 pcs.)
Procedure
Step
3 Align the friction plates with auxiliary tool
(self-made pin).
Figure 6.66
Friction plates
1
Steel friction plate
2
3mm
Steel friction plates
4
1mm(4 pcs.)
Auxiliary tool (self-
2
made pin)
Effectivity: 915 i A Series
Edition 0/Rev. 1