CLEANING, DISINFECTING AND STERILIZING
Please conform to the recommendations of the Reprocessing Instructions manual delivered with
your product regarding the procedure of cleaning, disinfecting, sterilizing and packing of the components.
Follow present-day regulations enforced in the country about reprocessing.
Clean the unit only with an alcohol-based, commercially available (ethanol, isopropanol), colorless
disinfectant. The use of scouring powder or an abrasive sponge will damage its surface.
Never remove the silicone cap from the powder chamber holder when cleaning the unit.
Do not use needles on the silicone cap of the powder chamber holder.
80
FB-581_CN_rev_B_AIR-FLOW Master Piezon.indd 80
13/09/2018 16:19:57