Operating The Unit; Switching On - EMS AIR-FLOW MASTER PIEZON Operation Instructions Manual

Operating the unit

Switching On

ON
When the unit is turned on, the control lamps light up and then the unit returns to its previous configu-
ration and the powder chamber is under pressure.
Before treating the patient, rinse the eventual residues of the disinfecting solution used by the
Piezon system out of the circuit of the AIR-FLOW system. Put the handpiece above a sink and press
the foot pedal.
After 15 min. of inactivity, the unit switches to standby mode. Placing a finger on the touch-sensitive
zone wakes the unit from standby mode. The unit returns to its previous configuration.
60
FB-581_CN_rev_B_AIR-FLOW Master Piezon.indd 60 13/09/2018 16:19:35