Setting Up A Wireless (Wi-Fi) Network Connection - Pitney Bowes SendPro C Operator's Manual

Connectivity information
3. Enter the values you recorded in step 2 for the IP Address, Netmask, Gateway, and DNS
Address in the corresponding fields.
4. Tap Connect.
5. If it fails to connect, remove the network cable from the back of the device.
6. Tap the Connect button. Wait for the attempted connection to fail.
7. Plug the network cable back in.
8. Delete the values in the IP Address, Netmask, Gateway, and DNS Address fields.
9. Enter the IP Address, Netmask, Gateway, and DNS Address that you recorded in step 2.
10. Tap Connect.
NOTE: Your device will remember the Static IP information even if you switch back to DHCP and
then back again. This information includes IP Address, Netmask, Gateway and DNS Address as
well as the proxy information.

Setting up a wireless (Wi-Fi) network connection

You can connect your SendPro C, SendPro+ device via a wireless network connection. You can also
connect your device to your mobile phone's hotspot, should the need arise.
1. Tap Settings on the toolbar.
2. Tap Wi-Fi in the Device & Network section.
3. Choose your Wi-Fi network from the list. Tap Add Network if your Wi-Fi network does not
appear.
4. Enter your Wi-Fi password and identity.
Tip: Use the show password option to make sure that you enter your password correctly.
5. Tap Advanced Options if your network requires advanced network settings such as a proxy
server or static IP address:
To set up a proxy server:
l
a. Select Manual in the Proxy drop down.
b. Tap on the line and enter the information provided by your IT department.
To set up a Static IP address:
l
a. Select the IP Setting menu and choose Static.
b. Tap on the line and enter the value provided by your IT department.
c. Tap the > in the green circle.
Pitney Bowes Operator Guide February 2021 32