Pitney Bowes SendPro C Operator's Manual page 105

Maintenance
4. Locate the wick (with metal grate) on the moistener base.
5. Remove the metal grate and wick from the moistener base.
6. Clean the brush and wick with water and rinse thoroughly.
7. Place the wick back in the metal grate and replace the grate in the moistener base.
8. Slide the moistener brush back into the holder.
9. Replace the moistener brush assembly on top of the moistener base and secure with the plastic
thumbscrew.
Pitney Bowes Operator Guide February 2021 105