Emerson wirelessHART Rosemount Series Quick Start Manual page 28

Quick Start Guide
Note
Mount the instrument bracket with the stamped arrow sign pointing
up. Not following this instruction results in an inadequate mounting
of the instrument.
Figure 4-7: Attaching the instrument bracket and back plate
4.3 Grounding the transmitter
The transmitter operates with the housing either floating or grounded;
however, the extra noise in floating systems affects many types of readout
devices.
If the signal appears either noisy or erratic, grounding the transmitter at a
single point may solve the problem. Grounding of the electronics enclosure
should be done in accordance with both local and national installation
codes.
28
April 2021
Emerson.com/Rosemount