Emerson wirelessHART Rosemount Series Quick Start Manual page 49

April 2021
Table 7-6: ATEX Intrinsic Safety (continued)
Specific conditions for safe use (x)
- The external connections must be connected to intrinsically safe circuits with
parameters complying with the parameters specified in this certificate and the
manufacturer's installation manual.
- This product – the Rosemount 4390 Series of Corrosion and Erosion Wireless
Transmitters – is approved with following battery pack model 701PBKKF
SmartPower Module - Black.
- The plastic enclosure of the battery pack model mentioned above may constitute a
potential electrostatic ignition risk and caution should be used when being handled.
- The plastic antenna and the painted enclosure may present a potential
electrostatic ignition hazard and must not be rubbed or cleaned with a dry cloth.
- Instrument enclosure made of 100% aluminum is used, impact and friction must be
avoided due to ignition hazard.
- The probe outputs only connected to simple apparatus (passive circuits). All other
terminals will only be connected to IS rated apparatus complying with the IS input
parameters.
- Separate IECEx / ATEX certified IP66 cable gland or plugs must be used.
Quick Start Guide
Quick Start Guide
49