Emerson wirelessHART Rosemount Series Quick Start Manual page 5

April 2021
• 1x paper copy of this guide
• 1x probe cable gland (when the gland option is selected on the device
model code.)
Note
The device is shipped without batteries. The Rosemount 4390 Wireless
Transmitter requires the Black Power Module model 701BKKF that must be
ordered as a separate item. For more information, refer to the
701P SmartPower
1.2 Required tools and equipment for installation
This section lists the required tools and equipment for physical installation,
configuration, and commissioning of the Rosemount 4390 Wireless
Transmitter.
1.2.1 Configuration and commissioning
The Rosemount 4390 Wireless Transmitter must be configured before
physical installation. Direct configuration can be performed using either a
Field Communicator or an AMS Device Manager.
• AMS Trex Device Communicator. For more information, see
Emerson.com/AMS-Trex.
• AMS Device Manager. For more information, see
Device-Manager.
• HART Modem and Cable (when using AMS Device Manager)
1.2.2 Physical installation
The tools listed below are required for mounting the device on the plant.
• Hex key 3 mm for opening the junction box lid and the cover's locking
screws
• Hex key 5 mm and 13 mm for assembling the mounting bracket
• Slotted screwdriver 3 mm, for probe wiring terminals
• Adjustable spanners (0-40 mm) for probe cable gland mounting
Note
The equipment and tools listed on this section are not included.
Quick Start Guide
™
website Emerson.com/SmartPower.
Quick Start Guide
Emerson.com/AMS-
5