Table of Contents
Advertisement
Quick Start Guide
2
Wireless considerations
Related information
Conduit connection
2.1
Power up sequence
The Rosemount 4390 Series of Corrosion and Erosion Wireless Transmitters
and all other wireless devices should be installed only after the Wireless
Gateway has been installed and is functioning properly. Wireless devices
should also be powered up in order of proximity from the gateway,
beginning with the closest. This results in a simpler and faster network
installation. Enable active advertising on the gateway to ensure new devices
join the network faster. For more information, see the
Gateway and 781S Smart Antenna Reference
2.2
Antenna position
The antenna should be positioned vertically, either straight up or straight
down, and it should be approximately 3 ft (1 m) from any large structure,
building, or conductive surface to allow for clear communication to other
devices.
Figure 2-1: Antenna position
6
Emerson Wireless 1410
Manual.
Emerson.com/Rosemount
April 2021
Advertisement
Table of Contents
