Emerson wirelessHART Rosemount Series Quick Start Manual page 21

April 2021
Related information
Field mounting
Grounding the transmitter
Installing the power module
4.1 Probe cable wiring connection
The Rosemount 4390 Wireless Transmitter has 3 field terminals for probe
cable connection inside of its junction box.
The terminals are identified as
a different wiring scheme. When connecting a probe to the instrument
terminals, the user should follow the tables in this section to ensure proper
wiring connection of the probe cable. Refer to
WARNING
Electrical shock could cause death or serious injury.
Use extreme caution when connecting the leads and terminals.
Figure 4-2: Field terminals for probe cable connection
The terminals of the models 4391 and 4392 may look physically the same;
however, they are different in design, and only support the probe types
indicated in
The wiring color schemes presented in the tables below considers the two
probe cable types offered by Emerson, Standard cable Multicable and
Quick Start Guide
Configure sensor type and
, and , and each probe type requires
J1 J2 J3
Figure
parameters.
Quick Start Guide
4-2.
21