Emerson wirelessHART Rosemount Series Quick Start Manual page 27

April 2021
Note
Mount the instrument bracket with the stamped arrow sign pointing
up. Not following this instruction results in an inadequate mounting
of the instrument.
Figure 4-6: 2-inch pole mounting
4.2.4 Attaching the instrument bracket and the back plate
Procedure
1. Position the instrument bracket on the mounted back plate. The
instrument bracket and back plate are designed to easily connect to
each other. If the assembly is correct, the top and right-side holes
from each plate are concentric.
2. Use 4x M6x12 screws to lock the instrument bracket to the back
plate. To ensure the holes are aligned, insert all attachment bolts into
place before tightening. Use the Split lock M6 washers to ensure
proper assembly. Refer to
Quick Start Guide
Figure 4-7.
Quick Start Guide
27