Appendix E. Controller Displays From The Engine Ecm - Kohler APM402 Operation

The controller display showing engine information is dependent upon the engine manufacturer and the corresponding Engine
Control Module (ECM). The following list indicates which engine displays are available by the engine manufacturer. This
information is subject to change by the engine manufacturer.
Note:
See the generator set specification sheet for engine model identification.
Some engines do not have an ECM and in some cases the ECM information is not available as a controller display. In these
situations, critical information like oil pressure and coolant temperature are displayed by the controller using independent engine
sensors not used by the ECM.
Controller Displays
as Provided by the Kohler Diesel
Engine ECM (KDI M, TM*)
Intake air pressure
Intake air
Temperature
Coolant level
Coolant temperature
Crankcase pressure
ECM battery voltage
Engine model
number
Engine serial number
Engine speed
Fuel pressure
Fuel rate
Fuel temperature
Oil level
Oil pressure
Oil temperature
C = Value displayed on controller, S = Value displayed in Site Tech, D = ECU diagnostic is supported
* Electronic governor and ECM are optional on KDI M and TM engines.
†
Controller uses local analog input to obtain this information
Note:
REOZMD/ROZMC (Mitsubishi engines) have an ECM but do not send signals to the generator set controller.
170
Appendix E.
Kohler Kohler Gas
Diesel
(KDI TCR) KG2204T)
D
D
S
S S
S S
C/S/D C/S/D
D
D
C/S/D
Controller Displays from the Engine ECM
Engine Manufacturer (and model)
GM/PSI and
Kohler Gas
(KG2204, (KG6208,
KG6208T)
D
D D
C/S/D C/S/D
S/D S
S
S
C/S/D C/S/D
C/S/D
S S
S†
D C/S/D
S
DD/MTU Doosan John Deere
S/D
S/D D
D D
C/S/D C/S/D C/S/D
S S
S S
S S
C/S/D C/S/D C/S/D
C/S†
C/S C/S/D
S
S
S/D† S†
C/S/D C/S/D C/S/D
D
Volvo
D
D D
D D
C/S/D
D
S S
S S
C/S/D
C/S/D
S S
S/D S
S† S†
C/S/D
SD
TP-6694 9/20