X2200/X9800/X5200 EVENT LOG DESCRIPTIONS
Event Description
Adjust 4-20mA Output
Aux Relay Active
RTC Reset
Fire Alarm
*CLR:Fire Alarm
IR Fire Alarm
*CLR:IR Fire Alarm
IR o i Calibration
Manual IR o i Test
Manual UV o i Test
Normal
Power Down
Power Up
Pre-Fire Alarm
Quick Fire Alarm
Soft Reset
System Reset
UV Fire Alarm
*CLR:UV Fire Alarm
UV o i Calibration
*Events with 'CLR:' preceding the event name, indicate the event condition is no longer present. (Not all 'CLR:' events are listed in this document.)
3.1
Status Condition
The 4-20mA output was adjusted.
The auxiliary relay has been activated.
The Real Time Clock was changed.
Fire alarm is active.
Fire alarm has cleared.
IR alarm is active.
IR alarm has cleared.
IR Optical Integrity (o i ) calibration was performed.
A manual IR Optical Integrity test was performed.
A manual UV Optical Integrity test was performed.
Normal operation.
Power removed or below functional limit.
Power is turned on.
Pre-alarm conditions are met.
The Quick fire alarm is active
Unit received a soft reset command.
Unit received hard reset command.
UV alarm is active.
UV alarm has cleared.
UV Optical Integrity calibration was performed.
14
95-8751