Det-Tronics X Series Instructions Manual page 12

Note: X3301 window shown. X3302 used the same window with the appropriate fields and buttons active.
Note: X5200 window shown. X9800 and X2200 use the same window with the appropriate fields and buttons active.
3.1
Figure 10— X3301 Control Screen
Figure 11— X5200, X2200, X9800 Control Screen
10
Press to perform an active manual o i test. Fire alarm
relay and 4-20 mA output will be activated.
Press to perform a passive manual o i test. Fire alarm
relay and 4-20 mA output will not be activated.
Press to initiate o i calibration.
Current output will be driven to the value selected here.
Select 4 or 20 mA output, then press increment or
decrement to calibrate actual output
Press to perform an active manual o i test. Fire alarm
relay and 4-20 mA output will be activated.
Press to perform an passive manual o i test. Fire alarm
relay and 4-20 mA output will not be activated.
Press to initiate o i calibration for IR sensor.
Press to initiate o i calibration for UV sensor.
Select 4 or 20 mA output, then press increment or
decrement to calibrate actual output.
95-8751