Editing The Line - JUKI JaNets JT Simple Instruction Manual

JaNets JT Simple Instruction Manual for the setup and change of the line

5-2. Editing the line

Select the Basic configuration > Line ... ① and press the Edit button ... ②.
①
The line setting screen is displayed. Enter the Line name ... ③, Floor ... ⑤, Shift ...
⑥ and Target output-quantity of shift ... ⑦.
* The Line number ... ④ cannot be edited.
* As many as 30 half-width characters or 15 full-width characters can be entered
as a line name.
* Avoid duplication of the line name in the System.
* Avoid duplication of the line number in the floor.
* As many as two shifts can be entered.
After you have completed editing, press the Save button .... ⑧ to confirm the data
you have entered.
④
③
※編集不可
⑦
⑥
19 / 30
②
⑤
⑧