Editing The Floor - JUKI JaNets JT Simple Instruction Manual

JaNets JT Simple Instruction Manual for the setup and change of the line

3-2. Editing the floor

Select the Basic configuration > Floor ... ①. Press the Edit button ... ②.
①
The factory name input dialog is displayed. Edit the Floor name ... ③ and the
Factory name ... ④.
* As many as 20 half-width characters or 10 full-width characters can be entered
as a floor name.
* Avoid duplication of the floor name in the System.
After you have completed editing, press the OK button ... ⑤ to confirm the editing
you have made.
③
④
⑤
12 / 30
②