Deleting The Factory - JUKI JaNets JT Simple Instruction Manual

JaNets JT Simple Instruction Manual for the setup and change of the line

2-3. Deleting the factory

Select the Basic configuration > Factory ...①. Select the factory you want to delete,
and press the Delete button ... ②.
The factory deletion confirmation message is displayed.
Press the OK button ... ③ to delete the factory from the factory list.
①
③
Caution)
If the factory you want to delete has been
registered with the floor, the message shown
at the left is displayed. In this case, the
factory cannot be deleted.
10 / 30
②