JUKI JaNets JT Simple Instruction Manual page 33

JaNets JT Simple Instruction Manual for the setup and change of the line
8. Setting the threshold for smileys
Select the Basic configuration > Smiley setting ... ① and press the Edit button ...
②. Then, the Thresholds for change ... ⑤ to ⑩ for the smileys can be set.
Enter values of ⑤ to ⑩ and press the OK button ... ③ to reflect the settings. If
you want to cancel the entry, press the Cancel button ... ④.
Smiley color
Green
Blue
Yellow
Red
* The quantity of output of each machine is determined using the following
formula, with respect to the entered thresholds.
Progress determination value = (Actual quantity of output - Target quantity of
output) / Target quantity of output) x 100
②
⑤
⑥
⑦
* Enter the same values to the Thresholds for change ⑤ and ⑧, ⑥ and ⑨
and ⑦ and ⑩ respectively.
If not, not-set state will exist in the respective determination levels. In such a
case, the smiley will be displayed in red.
Determination of
progress
Excessively advanced
Normal
Slightly delayed
Excessively delayed
④
③
①
Initial value
5
-5 - 5
-10 - -5
-10
⑧
⑨
⑩
30 / 30
Achievement
105 % or more
95 - 105 %
90 - 95 %
Less than 90 %