Floor Setting; Adding A Floor - JUKI JaNets JT Simple Instruction Manual

JaNets JT Simple Instruction Manual for the setup and change of the line

3. Floor setting

3-1. Adding a floor

Select the Basic configuration > Floor ... ① and press the +Add button ... ②.
①
The floor name input dialog is displayed. Enter a Floor name ... ③ and select the
Factory ... ④.
* As many as 20 half-width characters or 10 full-width characters can be entered
as a floor name.
* Avoid duplication of the floor name in the System.
After you have entered the floor name, press the OK button ...⑤ to add the floor.
②
⑤
11 / 30
③
④