JUKI JaNets JT Simple Instruction Manual page 32

Hide thumbs Also See for JaNets JT Simple:

Table of Contents

JaNets JT Simple Instruction Manual for the setup and change of the line

Firstly, find and record the Machine number from the machine information setting

dialog.

(Refer to II-6. Machine setting.)

* In order to input the machine number in the terminal, it is recommended to

create a line configuration list that contains the lines in the factory in advance

and a list of machines of each line.

Machine information setting dialog

Then, input the Machine number you have recorded in each terminal following the

steps of procedure described below.

1. Press the F1 key ... ○ 1 . The "Ple. Input Machine#" screen is displayed.

2. Enter the Machine number (20-digit number at the maximum) that you have

already recorded using the Numeric keypad ... ②.

After you have entered the machine number, confirm the entry with the OK

button ... ③. Then, the message "Setting Completed" is displayed.

Machine number

①

②

③

29 / 30

Table of Contents