Fault; Handling And Installation - Angelo Po 0G1PE2 Use And Installation Manual

The appliance has been tested before being put
into service. The information provided below is in-
tended to assist in the identification and correction
of any anomalies and malfunctions which might oc-
cur during use.

Fault

The plates do not turn on
The plates do not turn off
IT IT

HANDLING AND INSTALLATION

GB GB
DE DE
Important
When handling and installing the appliance
FR FR
comply with the information provided by
the constructor directly on the packaging,
on the appliance and in the instructions for
ES
ES
English
TROUBLESHOOTING
Electrical connection not made
RECOMMENDATIONS FOR HANDLING AND INSTALLATION
FAULT
The user can solve some of these problems him-
self, but for others specific technical knowledge or
skill is required, and so they must only be carried
out by qualified staff with recognised experience ac-
quired in the specific sector of operation.
Cause
correctly
Switch faulty
Component fault
use. If necessary, the person authorised to
carry out these operations must organise a
"safety plan" to protect the people directly
involved.
- 10 -
Remedy
Check the connection of the
electrical wires
Important
Contact the after-sales service
Replace the switch
Important
Contact the after-sales service
Important
Contact the after-sales service
6
7