Table of Contents
Advertisement
Chapter 2: Hardware Installation
This chapter provides a brief description of the hardware components and their function and
the tunnel settings wiring diagrams for a new Tunnel Master® Jr. installation. The following
instructions will provide detailed information on proper relay box mounting and installation
of the Entrance Keypad.
Planning for Installation
Before you begin, please read this entire manual.
„
„
Permanent connections must be installed by a licensed electrician and must comply in
accordance with all local and national codes.
Wiring can be contained in rigid PVC conduit or metal conduit.
„
High-voltage (AC) and low-voltage (DC) must not be combined in a common conduit,
„
junction box, or wire trough.
Power for the Tunnel Master® Jr. and any peripherals must come from the dedicated UPS
„
as supplied by ICS.
The Tunnel Master® Jr. and peripheral equipment must be properly grounded.
„
Test connections in the manual override position prior to system start-up.
„
Before disposing boxes and cartons, look through to make certain all manuals, cables,
„
connectors, and more have been removed.
WARNING: Failure to properly install the Tunnel Master® Jr. system will void the warranty
and could result in serious injury or death.
Innovative Control Systems provides a toll-free number for customers and installers who have
questions pertaining to the installation:
Chapter 2: Hardware Installation
800-246-3469
Tunnel Master® Jr. User Manual
- Page 3
Advertisement
Table of Contents
Need help?
Do you have a question about the Tunnel Master Jr. and is the answer not in the manual?
Questions and answers