Entrance Keypad To Process Vehicles (Stack) - ICS Tunnel Master Jr. User Manual

Entrance Keypad to Process Vehicles (Stack)

For Stack with Keypad Only, these are the steps to follow:
Status Step Non-Stacking Action
Ready 1 Press the numeric button
associated with the service that the
customer has purchased
2 Press any additional extra service
buttons for other services the
customer may have purchased.
3 Press the Receipt button to add the
car to the stack.
4 Press the Roller Button to process
the next car on the stack.
5 Vehicle will start through the wash
breaking the gate switch.
6 To clear any services selected, press
the AC button.
Stack 1 Press the AC button to view the
cars on the stack.
Pick
2 If you press a flashing number key.
3 If you press the Receipt button.
Table 6-3. Entrance Keypad to Process Vehicles (Stack)
Page 53 - Tunnel Master® Jr. User Manual
Keypad Response
The red indicator light will light up indicating the input has
been accepted.
The red indicator light will light up for each additional service
button pressed indicating the input has been accepted.
The number that corresponds to the stack will flash for
5 seconds. Then the light will turn off. If no base wash is
selected, this key is ignored. If you want to print a receipt, hit
the button a second time.
The Roller light will turn on and the roller will fire. If you have
auto roller set to Y, this is not necessary.
Once the car reached minimum car length, the car will come
off of the stack.
This will clear any services if selected. If no services are
selected, the AC key will toggle you in and out of the stack
pick, if cars are on the stack.
You will see the lights on the numbers flashing if there are
any cars on the stack. This status will only stay active for 5
seconds of inactivity before it will return you to the Ready
status.
This will take you to the stack edit status and the services for
that car will display.
This will print the last car added to the stack, if there are cars
still on the stack.
Chapter 6: Entrance Keypad