Set or Change Password
NOTE:
Forgot the password? Contact ICS Technical Support at 800-246-3469.
Setting a password is optional. If you have set a Password, the user is required to enter that password in
order to access menu options. This feature allows you to restrict access to the menus in the Tunnel Master® Jr.
system. Follow the steps in the following table to set or change the Tunnel Master Jr. system password.
Step
1
Press the Menu button on the main screen of the
Tunnel Master Jr.
2
Press the numeric key 3 from the Main Menu to
select Configure Wash.
3
Press the numeric key 6 to select Set Password.
4
Enter in your password. Example: For the letter L,
press the 4 key three times.
5
Press the ENT key to save your changes, and return
to the Configure Wash Menu.
IMPORTANT: Remember this password.
Table 4-2. Set or Change Password Instructions
Access a Password Protected Menu
After a password has been set in the system, any access to the menu options will require that the user enter
that password.
NOTE:
If password is forgotten, contact ICS Support 800-246-3469.
Follow these instructions to access the password protected menu options:
Step
1
From the main screen, press the Menu key.
2
Using the numeric keypad, type in the first letter of
the password.
3
Wait until the cursor moves to the next position.
Warning: If you press ENT after entering a letter,
what you have entered to that point will be
accepted as the password and you will be returned
to the main screen display!
4
Repeat steps 2 & 3 until the entire password is
entered.
5
Press the ENT button to accept the password.
Table 4-3. Access a Password Protected Menu
Page 31 -
Tunnel Master® Jr. User Manual
Action
Action
Screen Display
[1] Bump Shift
[4] View Counts
[2] Wet Down Wash
[5] Print Reports
[3] Configure Wash
[1] Services
[4] Wash Settings
[2] Outputs
[5] Set Date Time
[3] Output List
[6] Set Password
New Password: _
New Password: _
New Password: ICS_
Screen Display
[ICS Tunnel Controller 10:25:35 PM VER 1 REV
5.11
04/15/2019
Password _ _ _ _ _ _
ADDR =1
CARS 0000
ICS Tunnel Controller 10:25:35 PM VER 1 REV
5.11
04/15/2019
Password * _ _ _ _ _
ADDR=1
CARS 0000
ICS Tunnel Controller 10:25:35 PM VER 1 REV
5.11
04/15/2019
Password * _ _ _ _ _
ADDR=1
CARS 0000
ICS Tunnel Controller 10:25:35 PM VER 1 REV
5.11 04/15/2019
Password ****_ _
ADDR=1
CARS 0000
[1] Bump Shift
[4] View Counts
[2] Wet Down Wash [5] Print Reports
[3] Configure Wash
Chapter 4: Wash Configuration
Need help?
Do you have a question about the Tunnel Master Jr. and is the answer not in the manual?