Updating Your Operating System - HP x4000 Technical Reference Manual

Updating Your Operating System

If you are adding a second processor to your Workstation (or removing a
processor), you must update your operating system to reflect these
changes.
Windows 2000
To update your operating system in Windows 2000:
1. Go to the Control Panel by selecting
2. Select the
3. In the Hardware tab, select
4. Expand the
have is displayed:
•
ACPI UniProcessoor PC
•
ACPI MultiProcessor PC
To change the type of support, double click on this icon to bring up the
ACPI PC properties.
5. In the Driver tab, select
Wizard appears and you must select
6. Choose to display a list of all the known drivers and click
7. When all the drivers are located, click the radio button to show all
hardware of this device class, select one of the following and click
to install the new driver:
•
ACPI MultiProcessor PC
•
ACPI UniProcessoor PC
Windows NT
To update your operating system in Windows NT, use the HP
DualExpress utility which is posted at
Chapter 10
This manual downloaded from http://www.manualowl.com
Installing or Replacing Parts and Accessories
icon.
System
Device Manager
branch. The type of support that you currently
Computer
Update Driver
if you have added a second processor.
if you have removed your second processor.
Start > Settings > Control Panel
.
. The Upgrade Device Driver
to continue.
Next
Next
www.hp.com/workstations/support
Processor
.
.
Next
.
179