Figure 10-24
Removing the Power Supply Unit
Installing the Power Supply Unit
To install the power supply unit:
1. Insert the new power supply unit.
2. Secure it to the back and top of the chassis using the four screws you
previously removed.
3. Reconnect all internal power supply connectors.
4. Return the Workstation to its upright position.
5. Replace the Workstation's cover (refer to "Replacing the Cover and
Front Bezel" on page 148).
6. Reconnect all the power and telecommunications cables.
Chapter 10
This manual downloaded from http://www.manualowl.com
7
5
Installing or Replacing Parts and Accessories
6
Power Supply
183