Remove/Replace Conveyor Belt - Prince Castle DCFT-MCD Series Service Manual

Vertical Toaster
DCFT-MCD Series
Unplug Unit.
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Remove Front Door.
2
Reference Drivetrain Removal. Page 24.
3
Turn Belt To Find Master Link.
4
Compress belt using (1) vice grip on each side.
5
Printed in USA 1/15 © 2015

Remove/Replace Conveyor Belt

WARNING
Use needle nose pliers to push out link.
7
Slide out link shaft from belt.
8
PULL OUT BELT FROM TOP TO AVOID DAMAGE
9
TO OTHER COMPONENTS.
38 527-504revF_EN