Prince Castle DCFT-MCD Series Service Manual page 25

Remove/Replace Motor and Drive Train Assembly (Cont..)
Ensure the vice grips are still in place on both sides of
10
the unit.
Align Drivetrain to holes in the sheet metal.
11
Align Shaft pins with slotted gear on both sides.
12
Install (2) 3/8" drivetrain mounting nuts.
13
Remove vice grips on both sides. Close front and back
14
doors.
Install (2) 3/8" Chain Guard Nuts.
15
527-504revF_EN
Re-Connect motor power plug.
16
Re-connect display and overlay wires to right side
17
panel.
Align panel to DCFT. Install (7) screws.
18
Install both compression knobs.
19
Plug in unit.
20
25
Vertical Toaster
DCFT-MCD Series
Printed in USA 1/15 © 2015