Prince Castle DCFT-MCD Series Service Manual page 27

Use 11/32" nut driver to remove (4) main club assy
15
nuts. (Both front and back)
Use 5/32" T Handle to remove (2) club platen bolts.
16
Use stubby Philips screw driver to disconnect all wires
17
to terminal block.
527-504revF_EN
Remove/Replace Club Assy (Cont..)
Disconnect (2) Probe Connectors.
18
Unhook and remove high limit switch probe.
19
Cut top zip tie holding wires together.
20
Pull out club assy.
21
27
Vertical Toaster
DCFT-MCD Series
CAUTION: Remember
to tuck wires behind
hook to avoid wires
pinching.
Printed in USA 1/15 © 2015