Lotus Evora 400 2018 Owner's Handbook Manual page 82

SERVICING & MAINTENANCE
stubborn contamination from the car's
matt paint finish.
- Spray the automotive salt-free car sham-
poo detergent solution onto the affected
area and allow to soak thoroughly before
gently abrading in small circular move-
ments to remove the contamination. Avoid
heavy abrasion as this will mark the matt
paint surface.
- Dry the area and clean using 'Go-Foam'.
When this has been wiped dry, apply
only 'Armor All Protectant' solution with
a clean micro-fibre cloth, turning the
cloth regularly until a clean dry surface
is achieved.
- Avoid contact with any wax or other pol-
ishing materials on the matt surface when
polishing the gloss black stripe areas.
- Similarly, avoid using any abrasive ma-
terials when polishing the gloss black
stripe areas, as the gloss finish may be
damaged.
- Aggressive solvent based cleaners should
not be used to clean the car's matt paint
finish.
- Wax or abrasive polishes should not be
used on the car's matt paint finish as
these will mark and contaminate the car's
matt paint finish and may prove very dif-
ficult to remove.
- Use of cleaning or paint care products not
approved by Lotus, or failure to follow the
82
E132T0324JA Federal Evora 400 From SOP OHB English Language.indd 82
paint care and maintenance procedures
may result in detrimental affects to the
car's paint finish and could invalidate the
Limited Warranty in respect of the car's
paint finish.
15/08/2018 14:47:29