Table of Contents
Advertisement
KEYS & SECURITY ALARM
Emergency Disarming/Mobilising
If the keyfob fails to function and a spare
keyfob is not available, the alarm system's
security code may be used to disarm the
alarm (if access is available to the cabin).
Procedure
The override procedure can be started
once the alarm has been triggered and the
first 30 second cycle has been completed.
ncy Disarming/Mobilising (PFK Alarm)
- The ignition must be turned
key transmitter is damaged or fails to function, and a spare is not
able, the alarm system's unique 5 digit (PIN) Identification Number
ON and then OFF within 3
be used to disarm the alarm provided that a key blade is available
cess the cabin:
seconds after the alarm has
ceased sounding. The alarm
Emergency Disarming/Mobilising (PFK Alarm)
tell tale will extinguish
rn on
the ignition. The alarm tell tale will light.
Off
confirming
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
procedure can begin.
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
hin 10 seconds,
turn the ignition
off; the tell tale will begin to flash.
er a number of flashes corresponding to the first digit of the PIN, for
ample, 23121.
- 4 seconds after the ignition has been
On
2
=
3121
turned off the alarm
Turn on
the ignition. The alarm tell tale will light.
1
2
a first sequence of 10 flashes.
Example if the security code is 2312
Within 10 seconds,
turn the ignition
Off
After a number of flashes corresponding to the first digit of the PIN, for
example, 23121.
2
=
3121
Emergency Disarming/Mobilising (PFK Alarm)
Off
1
2
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
- At the second flash turn the ignition on
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
for 1 second and then turn off.
On
After 4 seconds the alarm
Turn on
the ignition. The alarm tell tale will light.
start flashing again.
Within 10 seconds,
turn the ignition
Off
22
After a number of flashes corresponding to the first digit of the PIN, for
example, 23121.
1
2
E132T0324JA Federal Evora 400 From SOP OHB English Language.indd 22
- At the third flash turn the ignition on for
- Repeat this process until all 4 digits have
Emergency Disarming/Mobilising (PFK Alarm)
Off
Emergency Disarming/Mobilising (PFK Alarm)
If the key transmitter is damaged or fails to function, and a spare is not
Off
available, the alarm system's unique 5 digit (PIN) Identification Number
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
On
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
On
Note: If your security code contains a '0'
Turn on
the ignition. The alarm tell tale will light.
digit, this corresponds to 10 flashes of the
On
alarm
Turn on
the ignition. The alarm tell tale will light.
Off
Within 10 seconds,
Off
After a number of flashes corresponding to the first digit of the PIN, for
example, 23121.
the
override
- If the code is entered correctly, the
Emergency Disarming/Mobilising (PFK Alarm)
Off
Within 10 seconds,
turn the ignition
off; the tell tale will begin to flash.
1
Off
After a number of flashes corresponding to the first digit of the PIN, for
example, 23121.
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
may be used to disarm the alarm provided that a key blade is available
2
=
3121
to access the cabin:
1
2
tell tale will start
Emergency Disarming/Mobilising (PFK Alarm)
Emergency Disarming/Mobilising (PFK Alarm)
Off
On
Off
Turn on
the ignition. The alarm tell tale will light.
If the key transmitter is damaged or fails to function, and a spare is not
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
available, the alarm system's unique 5 digit (PIN) Identification Number
may be used to disarm the alarm provided that a key blade is available
may be used to disarm the alarm provided that a key blade is available
2
312
to access the cabin:
to access the cabin:
- If, at any stage, a number is entered
off; the tell tale will begin to flash.
On Off
On Off
Within 10 seconds,
turn the ignition
On
Off
On
After a number of flashes corresponding to the first digit of the PIN, for
example, 23121.
Turn on
the ignition. The alarm tell tale will light.
Turn on
the ignition. The alarm tell tale will light.
2
=
1
2
Within 10 seconds,
turn the ignition
off; the tell tale will begin to flash.
Off
Within 10 seconds,
turn the ignition
off; the tell tale will begin to flash.
Off
After a number of flashes corresponding to the first digit of the PIN, for
After a number of flashes corresponding to the first digit of the PIN, for
example, 23121.
example, 23121.
Note: Automatic re-arming (if fitted) of the
2
2
=
3121
=
3121
alarm and automatic door locking cannot
1
2
1
2
occur until a working keyfob is used to
tell tale will
operate the alarm.
off; the tell tale will begin to flash.
2
=
3121
Emergency Disarming/Mobilising (PFK Alarm)
Off
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
On Off
On
Off
Turn on
the ignition. The alarm tell tale will light.
Emergency Disarming/Mobilising (PFK Alarm)
Off
Within 10 seconds,
Off
After a number of flashes corresponding to the first digit of the PIN, for
1 second and then turn off.
example, 23121.
1
On
been completed.
On-Off
On-Off
On-Off
On-Off
Off
tell tale.
turn the ignition
off; the tell tale will begin to flash.
2
=
3121
alarm will be overridden and the
2
engine mobilised. However, automatic
immobilisation will still occur after an
ignition off time of 40 seconds, requiring
a repeat of the procedure to mobilise.
off; the tell tale will begin to flash.
incorrectly, the system will immediately
revert to the start and the whole security
3121
code must be re-entered.
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
On
Turn on
the ignition. The alarm tell tale will light.
Programming Additional Keyfobs
Within 10 seconds,
turn the ignition
off; the tell tale will begin to flash.
After a number of flashes corresponding to the first digit of the PIN, for
example, 23121.
A maximum of 8 keyfobs may be
2
=
3121
programmed to the car.
1
2
turn the ignition
off; the tell tale will begin to flash.
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
1. Ensure that the alarm system is
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
2
=
3121
disarmed, turn the ignition ON, but do
2
not start the engine.
2. The alarm tell tale will flash for 1
Turn on
the ignition. The alarm tell tale will light.
second; during this flash period press
and hold the Interior Central Door
Locking (CDL) Switch for at least 1
Within 10 seconds,
turn the ignition
off; the tell tale will begin to flash.
After a number of flashes corresponding to the first digit of the PIN, for
second, see page 21 for more details.
example, 23121.
2
3. The alarm siren will emit a low tone
=
3121
beep and the hazard lights will flash
1
2
Emergency Disarming/Mobilising (PFK Alarm)
Off
twice to confirm the system is in
If the key transmitter is damaged or fails to function, and a spare is not
available, the alarm system's unique 5 digit (PIN) Identification Number
program mode.
may be used to disarm the alarm provided that a key blade is available
to access the cabin:
4. Press any button on a keyfob to be
added, a high tone beep from the alarm
On
siren and a single flash of the alarm
Turn on
the ignition. The alarm tell tale will light.
tell tale confirms the key fob has been
added.
5. To exit program mode, turn the ignition
Within 10 seconds,
Off
After a number of flashes corresponding to the first digit of the PIN, for
OFF, a low tone beep of the alarm siren
example, 23121.
and a single flash of the hazard lights
will confirm exit.
1
2
6. To program more key fobs, repeat this
procedure from step 1.
turn the ignition
off; the tell tale will begin to flash.
2
=
3121
15/08/2018 14:46:31
Advertisement
Chapters
Table of Contents
