Unit Setting; Clock Adjustment; Repeating Menu; Exiting Menu - Lotus Evora 400 2018 Owner's Handbook Manual

INSTRUMENTS, SWITCHES & TELL TALE LAMPS
Automatic Vehicles: GSI functions only in
'Manual Gear Selection Mode'. Refer to
the 'Automatic Transmission' section for
further information.
46
E132T0324JA Federal Evora 400 From SOP OHB English Language.indd 46
INFORMATION BUTTON
Press to select

Unit Setting

The information display button can be
used to show alternative speed/mileage/
temperature units and adjust the clock
date/time. With the ignition key inserted,
but ignition OFF, the button operates as
follows:
Press the info. button for more than one
second then release.
- The RH screen will display the date and
time.
- The LH screen will display the units
screen with speed units flashing.
- Press the button again for less than 1
second to change unit of speed.
- Press the button again for greater than
1 second to change the distance unit for
the trip odometer.
- This procedure is repeated through
each unit until the clock is selected.

Clock Adjustment

- To change the time, press the button
for less than 1 second, repeating these
momentary presses until the hour
figure required is displayed.
- Press the button again for more than
1 second but less than 3 seconds to
highlight the minutes display.
- Press the button for less than 1 second,
repeating these momentary presses
until the minute figure required is
ohe187
displayed.
- Press the button again for more than
1 second but less than 3 seconds to
highlight the date display.
- Follow the same procedure used for
time adjustment until the required MM/
DD/YY is displayed.

Repeating Menu

Press the button again for more than 1
second but less than 3 seconds to return
to unit of speed

Exiting Menu

Perform one of the following actions:
- Do not press the information button for
10 seconds or more.
- Turn the ignition on.
- Remove the key from the ignition.
15/08/2018 14:46:52