Automatic Hitch Of The Multi-Level Hitch Device Cbm; Modular System Of Hitches For Trailers And Semi-Trailers; Bracket Module Of Pivoted Pull Bar; Pivoted Pull Bar - Zetor Proxima Plus 85 Operator's Manual

AUTOMATIC HITCH OF THE MULTI-
LEVEL HITCH DEVICE CBM
Moving of the lever (1) in direction of the
arrow (a) slides the pin (2) into the upper
position that is indicated by the extracted
warning indicator (3), see fig. (A).
After sliding the hitch onto the pole eye
the pin slides automatically into the
trailer pole eye. The hitch pin (2) can be
engaged manually by sliding the lever (1)
in direction of the arrow (b). Engagement
of the pin is indicated by the retracted
warning indicator (3), see fig. (B).
After connecting the trailer it is
always necessary
whether the warning indicator (3)
is retracted as shown on fig. (B).
TRANSPORT USE
E304
MODULAR SYSTEM OF HITCHES FOR
TRAILERS AND SEMI-TRAILERS
Types of modules:
Fig. (B) – Pivoted pull bar bracket.
Fig. (C) – Pivoted pull bar bracket with
fixed pin.
Fig. (D) – Bracket with ball ø 80.
Dismounting – fig. (A):
1. Dismount the locking screw (1).
2. Secure the module against fall,
unlock and dismount the pins (2).
3. Slide out the module from the bracket
downward.
to check
Mounting is performed in reverse order.
E305
BRACKET MODULE OF PIVOTED
PULL BAR
The bracket module of the pivoted pull
bar is located in the multi-level hitch
bracket.

PIVOTED PULL BAR

Dismounting:
1. Unlock and dismount the pins (1).
2. Pull out the pivoted pull bar in direc-
Mounting is performed in reverse order.
71
tion of the arrow.
E306