Setting The Cooking Temperature - GILES GBF-70 Operation & Service Manual

Fryer Operation
4.01.3

Setting the Cooking Temperature

Cooking Temperature setpoint is input manually. Menu Item cooking presets do not include temperature settings.
Instruction prompts are shown on the Upper Display to help guide User through the process.
DO NOT place Heat Switch in the [HEAT] position unless vat is filled to the FULL level with
cooking oil.
• If actual oil temperature is lower than the entered setpoint, Controller enters PREHEAT (small red HEAT indicator
on Controller turns ON). Before oil will actually begin heating, the Heat Switch on the Control Panel must be
placed in the [HEAT] position. The amber HEAT indicator on the Control Panel will turn ON and oil begins heating.
• If the oil temperature is already equal to or greater than the entered setpoint, an alarm sounds and the message
"SETPOINT REACHED" is displayed. Press the [ALARM] key to enter READY state. Fryer is ready for cooking.
While heating, real-time actual oil temperature will be shown on the Lower Display. After reaching setpoint, the
display changes to show the temperature setpoint.
NOTE:
Pressing the [TEMP] key twice (2x) will display actual oil temperature for 20 seconds.
Default unit for Temperature is [°F] ... this can be changed in User Settings, see Section 4.01.8.
Use keypad to enter cooking temperature
setpoint ( F). Ex: 325 = 325°F
GBF-70 Fryer
33