Setting The Cooking Temperature - GILES GBF-70 Operation & Service Manual

Fryer Operation
4.01.3

Setting the Cooking Temperature

Cooking temperature setpoint must be input manually, as menu Item presets do not include temperature settings.
Instruction prompts will be shown on the upper display to help guide you through the process.
DO NOT place HEAT switch in the [HEAT] position unless vat is filled to [FULL] level with
cooking oil or water.
• If actual oil temperature is lower than the entered setpoint, controller enters PREHEAT (small red HEAT indicator
beside the lower display screen turns ON). Before oil will actually begin heating, the control panel HEAT switch
must be placed in the [HEAT] position. The amber control panel HEAT indicator light will turn ON and oil begins
heating.
• If actual oil temperature is already equal to or greater than the entered setpoint, the alarm sounds and message
"SETPOINT REACHED" is displayed. Press the [ALARM] key to enter READY state. Fryer is ready for cooking.
While heating, real­time actual oil temperature is shown on the lower display screen. After reaching setpoint, the
display will change to show the setpoint temperature instead of actual.
NOTE:
Pressing the [TEMP] key twice (2x) will display actual oil temperature for 20 seconds.
Default unit for temperature is [°F] ... it can be changed in Section 4.01.8, User Settings.
GBF−70 Electric Fryer
Use keypad to enter cooking temperature
setpoint (°F). Ex: 325 = 325°F
33