Setting The Cooking Temperature - GILES GBF-2-GVH Series Operation & Service Manual

Operation
5.01.3

Setting the Cooking Temperature

Cooking Temperature setpoint must be input manually as shown below. Menu Item cooking presets do not
include a temperature setting.
Instructions are shown on the Upper OLED Display to help guide User through the process.
● If actual oil temperature is lower than the entered setpoint, Controller enters PREHEAT state (small red HEAT
indicator on Controller turns ON). Before oil will actually begin heating, the Heat Switch must be placed in the
[HEAT] position. The amber HEAT indicator on the Control Panel will turn ON oil begins heating.
● If the oil temperature is already equal to or greater than the entered setpoint, an alarm sounds and the message
"SETPOINT REACHED" is displayed. Press the [ALARM] key to enter READY state. Fryer is ready for cooking.
While heating, real-time actual oil temperature will be shown on the Lower Display. After reaching setpoint, the
display changes to show the temperature setpoint.
NOTE:
Pressing the [TEMP] key twice (2x) will display actual oil temperature for 20 seconds.
Default unit for Temperature is °F ... this can be changed in USER SETTINGS, see Section 5.01.8.
GBF-2-GVH Ventless Fryer
Use keypad to
enter cooking
temperature
setpoint (°F).
Ex: 325 = 325°F
45