Assigning Parameters Using Remote Operation; Introduction; Quick Start" Wizard - Siemens SITRANS TH100 Operating Instructions Manual

9.4

Assigning parameters using remote operation

9.4.1

Introduction

Introduction
This section describes the most important parameters and functions that are available
additionally over remote operation:
• "Quick Start" wizard
• Identification (TAG)
• Custom type
• Sensor calibration
• Transmitter sensor matching
• Assignment of dynamic variables
• Current output
9.4.2

"Quick Start" wizard

You use the "Quick start" wizard to configure your device in five steps for the required application:
• Step 1: Identification
• Step 2: Sensor settings
• Step 3: Assignment of dynamic variables
• Step 4: Process parameters
• Step 5: Process alarms
• Step 6: Summary
The summary provides an overview of the "old" and "new" parameters.
To store the parameters in SIMATIC PDM and transfer them to the device, click the "Apply"
button.
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB
9.4 Assigning parameters using remote operation
Parameter assignment
159