JDS Uniphase cORL-A1 Operating Manual page 53

Command
string
:POW
:REF
:STAT?
:POW
:REF
:VAL
:POW
:REF
:VAL?
:POW
:WAV
:AUTO
:POW
:WAV
:AUTO?
JDSU
Parameter type / Response type /
Unit / Info
Returns the type of power level
display.
Response type: <BOOLEAN>
• 0: absolute value
• 1: relative value
Sets the value for the specified
wavelength (to which the power level
reading is referred) in relative mode.
Parameter type: <NR1>,<NRf>
e.g. :POW:REF:VAL 1310,-34.50
sets the reference value for 1310 nm
to -34.50 dBm
Returns the value for the specified
wavelength (to which the power level
reading is referred) in relative mode.
Parameter type: <NR1>
Response type: <NRf>
Unit: dBm
e.g. :POW:REF:VAL? 1490
Determines whether device
recognizes Auto λ modulation
frequencies which automatically sets
the system calibration wavelength.
Parameter type: <BOOLEAN>
0: Auto-λ recognition off
1: Auto-λ recognition on
Default setting: 0
Returns whether Auto-λ recognition
is on or off.
Response type: <BOOLEAN>
0: Auto-λ detection off
1: Auto-λ detection on
cORL-A1
7 R C
EMOTE ONTROL
49