JDS Uniphase cORL-A1 Operating Manual page 22

4 B O
ASIC
Select Source
Mode
Firmware
Update
Select
Language
Editing the Lambda-Table
The wavelength table (λ-Table) supports the definition of
up to 30 wavelengths. The wavelengths with the attribute
"shown" form a set of wavelengths which will be rotated
through when the [λ] key is pressed.
The remaining wavelengths are "hidden".
E.g. if only two wavelengths have the attribute "shown",
you can toggle between them with a single keystroke.
To edit the λ-Table:
1. Press Edit λ-Table in the CONFIGURATION menu.
The EDIT λ-TABLE menu opens (displayed
wavelengths may vary according to model and
settings).
2. Highlight the entry to be edited and press
[MENU ENTER].
A window opens:
18
PERATION
Enable or disable compatibility to
OLS-15 signal modulation.
Download the current device
firmware version from the internet
to the device.
Select the language of the device
texts.
cORL-A1 JDSU