JDS Uniphase cORL-A1 Operating Manual page 18

3 G
ETTING
Operation from USB interface power
Although the USB interface is primarily intended for
remote control, it can also be used to power the
cORL-A1.
To power the cORL-A1 via the USB interface:
⇒ Just connect a standard USB cable to any USB socket
of a PC or USB hub.
Notes:
• The device can be operated manually even if it is
powered via the USB interface.
• The device will be powered by the SNT-121A Adapter
if the SNT-121A Adapter and the USB interface are
both connected.
14
S
TARTED
cORL-A1 JDSU